SAAB V4 Forum
SAAB V4 Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
 All Forums
 Classified Ads
 Parts For Sale
 Weber inlet manifolds/ (1.7) engine parts

Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!

Format Mode:
Format:BoldItalicizedUnderlineStrikethrough Align LeftCenteredAlign Right Horizontal Rule Insert HyperlinkInsert EmailInsert Image Insert CodeInsert QuoteInsert List

* Forum Code is ON
Smile [:)]Big Smile [:D]Cool [8D]Blush [:I]
Tongue [:P]Evil [):]Wink [;)]Clown [:o)]
Black Eye [B)]Eight Ball [8]Frown [:(]Shy [8)]
Shocked [:0]Angry [:(!]Dead [xx(]Sleepy [|)]
Kisses [:X]Approve [^]Disapprove [V]Question [?]

Check here to subscribe to this topic.

T O P I C    R E V I E W
mellePosted - 21 Dec 2014 : 23:28:10
I keep this thread up to date; last updated 25 July 2019. Some of these parts may also be on eBay, but you'll always get a better deal when contacting me directly by email at saabv4[at]saabv4[dot]com

All below parts are used and come strictly without warranty, prices are non-negotiable and plus post or collected from Bath. Inspection prior to purchase welcome. If you're interested in any of below parts, please email me at saabv4[at]saabv4[dot]com Any questions please feel free to ask and if you need more pics please let me know.

1.7 crank, standard size journals (measured with vernier calipers, not micrometers), may polish up and be used with std size bearings, but one con rod bearing is damaged and needs to be repaired, comes with new spigot bush, 300 250 (will be shipped in wooden box if required)

1.7 crank, media blasted and/ or phosphated, journals ground to max undersize (measured with vernier calipers, not micrometers), please note: this crank has been used in a rally engine and it has not been crack/ stress tested, comes with new spigot bush, 200 175 (will be shipped in wooden box if required)

2bbl/ Weber/ Solex inlet manifold + vacuum intermediate plate, 175 (example pic, only one available at the moment)

Timing gear set, 75 (example pic, several available). Separate cam gear 15, separate crank gear 15

Timing cover, 25 (example pic, several available) NOS timing cover listed here:

1.5 HC pistons (standard , measured with vernier calipers, not micrometers), set of four from one engine, reasonable condition, con rods useless as caps are missing, 35

Balance shaft, journals scratch free and within spec, 75 (pic is just an example, pics of actual shaft can be sent, several available)

Cam shaft, journals scratch free and within spec, good usable lobes, 75. Cam shaft for regrind (journals and lobes will need grinding), 20 (pic is just an example, pics of actual cam can be sent, one usable one and several for regrind available)

Oil pump, internals scratch free and within spec, 15 or 25 ultrasonic cleaned, proceeds to Red Cross. (pic is just an example, several available)

Thermostat housings, 7.50 each, proceeds to Red Cross (three available)

Free parts: thermostats, temp sensors, balance shaft plugs, valves, collets, valve springs, push rods, tappets, fuel pumps, thermostats. All parts in below pic completely free of charge including shipping, but a small donation to the Red Cross to offset the shipping costs would be appreciated. Complete push rod and tappet sets from one engine available as well and I have multiples of all parts in NL should stocks dry up. If you need any other small parts and nuts and bolts, just ask. Fair use policy. ;)

1970 96V4 "The Devil's Own V4"
1977 95V4 van conversion project
1988 900i 8V
4   L A T E S T    R E P L I E S    (Newest First)
mellePosted - 04 Dec 2019 : 21:22:06
V4 parts engines are increasingly difficult to find in Europe and prices are creeping up steadily as well. As a result, my 2bbl manifolds will be 175 in the new year, but if you buy one before the end of this year, you'll still pay 150 and I'll donate 25 to the British Red Cross.
mellePosted - 26 Nov 2019 : 17:28:55
Please email me your address details at saabv4[at]saabv4[dot]com and I'll reply with payment information.
AlexWPosted - 26 Nov 2019 : 16:16:53
Hi melle
I'll take the three thermostat housings pictured on the right
Let me know how to pay
mellePosted - 30 Sep 2019 : 20:07:46
Opening post updated and rest of the thread cleaned up (thanks for that Alec!).

Snitz Forums 2000
SAAB V4 Forum© 2000-04 Snitz CommunicationsGo To Top Of Page