Note: You must be registered in order to post a reply. To register, click here. Registration is FREE!
T O P I C R E V I E W | SAAB96L | Posted - 25 Oct 2021 : 18:24:34 Hello,
I will be lifting the engine out of my 96 on Wednesday. With everything stripped away, I noted a rigid tensioned vertical wire on the RH side that takes a 90 degree turn and goes through a hole in the g/box upper casing.
The end of it is slightly angled and overlaps the block by a couple of inches. It will need to be moved out of the way, but I wanted to check what it is ??
The other end appears to go under the g/box.
Thank you in advance.
Richard. | 4 L A T E S T R E P L I E S (Newest First) | SAAB96L | Posted - 27 Oct 2021 : 10:45:41 Cancel the last, thank you, removed the the steadies in full.
Regards.
Richard. | SAAB96L | Posted - 27 Oct 2021 : 08:16:19 Hello,
Forgot to ask this:
As the engine is coming out only - does the steady bar need to be detached from the g/box when the engine is raised a couple of inches OR is there sufficient play in the g/box steady bar to allow for such movement ??
Many thanks.
Richard. | SAAB96L | Posted - 25 Oct 2021 : 20:02:45 Thank you, Melle, I'm glad I asked.
Regards.
Richard. | melle | Posted - 25 Oct 2021 : 19:19:26 No need to remove it, it locates and tensions the release bearing arm.
www.saabv4.com |
|