T O P I C R E V I E W |
lumpey | Posted - 11 May 2017 : 08:40:37 I am looking for the pipe that connects the heater to the windsceen and door window under the dash, drivers side. Its for my 1974 saab 95. It got smashed during the work that was carried out recently. thanks in advance.
|
6 L A T E S T R E P L I E S (Newest First) |
melle | Posted - 19 May 2017 : 20:09:01 This is not a part you want to 3D print, rather make from aluminium tubing.
www.saabv4.com |
v4admin | Posted - 19 May 2017 : 18:32:10 had the same problem recently, had to take it off and it fell it many pieces in my hand, loads of glue gun, a piece of plumbing plastic pipe and back together again for now. Perhaps someone with the right kit could 3D print them? |
Wonky door | Posted - 19 May 2017 : 16:26:50 I had one of these disintegrate in my hand, I darn' t touch the other side after that. I substituted a piece of vacuum hose of the correct diameter. Don't have the small side demister pipe connected yet. |
Proudycakes | Posted - 16 May 2017 : 22:29:29 I was searching for these for a while without success. I bought some air ducting pipe from merlin motorsports of the correct diameter instead, works a treat and less fragile that the brittle plastic pipes. If you do manage to find a second hand one chances are it will crack during fitting. |
john-saab | Posted - 16 May 2017 : 18:55:00 I think the one required is the light grey one that turns to dust. I don't have a spare at the moment.
'73 96 (Vernon),'74 95 (Veronica)plus 4 other 95's and 2 96's |
andydeans3 | Posted - 16 May 2017 : 11:06:48 Lumpey Whole bunch of heater vents on E bay just now. Not sure if the one you want is among them..
Andy
http://www.ebay.co.uk/itm/vintage-saab-96-v4-heater-control-and-vent-parts-/222511176000?hash=item33ceb31940:g:eykAAOSwjDZYgVaW
1978 LHD SAAB 96 1978 MGB Roadster 2008 LHD "Classic" Renault Twingo |