|T O P I C R E V I E W|
|Dirtbiker||Posted - 15 Aug 2019 : 23:15:01|
Anyone know how these come apart...?
It seems to be an impossible puzzle. Looks straightforward but isn't...
I have been given this useful link for new clips which implies bending the tabs around the plastic but the tabs don't look very bendy...
Any tips appreciated and on another note - Shapeways - what a great idea!
|4 L A T E S T R E P L I E S (Newest First)|
|Dirtbiker||Posted - 18 Aug 2019 : 19:22:55|
I'll let you know how I get on and update on here when I have had a go. Been flatting and filler priming the front panel today...
|Woody||Posted - 18 Aug 2019 : 11:00:49|
IIRC the washer is a crimp fit and I was able to stretch slightly to enable removal.
|Dirtbiker||Posted - 17 Aug 2019 : 16:17:18|
Thanks that makes sense. What I really want to do is remove the screw from the cone shape adjuster and replace or zinc plate. This will be tricky as there is a washer permanently fixed next to the cone which I think I will have to destroy then somehow remake afterwards. I've got the springs and have in fact ordered replacements in almost the same size from ebay.
Thanks for your help,
|Woody||Posted - 16 Aug 2019 : 21:02:38|
I stripped mine for a repaint many years ago. You need to open up the slot on the plate where the cone shaped adjuster is. Once the the adjuster is released wind it out of threaded block in the lamp holder. There should be a spring at the arm centre pic which clips to lamp bucket. see my other post..