SAAB V4 Forum
SAAB V4 Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 Classified Ads
 Parts For Sale
 Weber inlet manifolds/ (1.7) engine parts
 New Topic  Reply to Topic 
 Printer Friendly 
AuthorPrevious Topic Topic Next Topic 

melle
V4 Guru

United Kingdom
2851 Posts

Posted - 21 Dec 2014 :  23:28:10 Show Profile Visit melle's Homepage Reply with Quote
I keep this thread up to date; last updated 13 October 2019. Some of these parts may also be on eBay, but you'll always get a better deal when contacting me directly by email at saabv4[at]saabv4[dot]com

All below parts are used and come strictly without warranty, prices are non-negotiable and plus post or collected from Bath. Inspection prior to purchase welcome. If you're interested in any of below parts, please email me at saabv4[at]saabv4[dot]com Any questions please feel free to ask and if you need more pics please let me know.


1.7 crank, standard size journals (measured with vernier calipers, not micrometers), may polish up and be used with std size bearings, but one con rod bearing is damaged and needs to be repaired, comes with new spigot bush, 300 250 (will be shipped in wooden box if required)




1.7 crank, media blasted and/ or phosphated, journals ground to max undersize (measured with vernier calipers, not micrometers), please note: this crank has been used in a rally engine and it has not been crack/ stress tested, comes with new spigot bush, 200 175 (will be shipped in wooden box if required)




2bbl/ Weber/ Solex inlet manifold + vacuum intermediate plate, 150 (example pic, several available)




Ported 2bbl/ Weber/ Solex inlet manifold (this one comes without a vacuum intermediate plate), Ported (not by me) for 38/ 38 carb, ports to block approx 23x44mm, vacuum port, 250







Solex 32TDID 2bbl carburettor, 50




Random set of heads; you might get lucky and get a set that can be tarted up for re-use, but they are priced as cores for complete overhaul. Valves will be removed if required, 50 per set (example pic, several available)




Timing gear set, 75 (example pic, several available). Separate balance shaft gear 25, cam shaft gear 15, crank gear 10 (NB: three separate gears don't make a matching set!)




Timing cover, 25 (example pic, several available) NOS timing cover listed here: http://www.saab-v4.co.uk/speedball/topic.asp?topic_id=45887





1.5 HC pistons (standard , measured with vernier calipers, not micrometers), set of four from one engine, reasonable condition, conrods useless as pins are missing, 40



Balance shaft, journals scratch free and within spec, 75 (pic is just an example, pics of actual shaft can be sent, several available)




Cam shaft, journals scratch free and within spec, good usable lobes, 75. Cam shaft for regrind, 20 (pic is just an example, pics of actual cam can be sent, several of both available)




Oil pump, internals scratch free and within spec, 15 or 25 ultrasonic cleaned, proceeds to Red Cross. (pic is just an example, several available)




Rocker covers, 10 per set, proceeds to Red Cross (two sets available)




Thermostat housings, 7.50 each, proceeds to Red Cross (several available)




Free parts: thermostats, temp sensors, balance shaft plugs, valves, collets, valve springs, push rods, tappets, fuel pumps, thermostats. All parts in below pic completely free of charge including shipping, but a small donation to the Red Cross to offset the shipping costs would be appreciated. Complete push rod and tappet sets from one engine available as well and I have multiples of all parts in NL should stocks dry up. If you need any other small parts and nuts and bolts, just ask. Fair use policy. ;)




1970 96V4 "The Devil's Own V4"
1977 95V4 van conversion project
1988 900i 8V

Edited by - melle on 13 Oct 2019 21:13:26

melle
V4 Guru

United Kingdom
2851 Posts

Posted - 30 Sep 2019 :  20:07:46 Show Profile Visit melle's Homepage Reply with Quote
Opening post updated and rest of the thread cleaned up (thanks for that Alec!).

www.saabv4.com

Edited by - melle on 11 Oct 2019 21:39:14
Go to Top of Page
 Previous Topic Topic Next Topic 
 New Topic  Reply to Topic 
 Printer Friendly 
Jump To: 
Snitz Forums 2000
SAAB V4 Forum© 2000-04 Snitz CommunicationsGo To Top Of Page