SAAB V4 Forum
SAAB V4 Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 Classified Ads
 Parts Wanted
 Heater pipe required
 New Topic  Reply to Topic 
 Printer Friendly 
AuthorPrevious Topic Topic Next Topic 

lumpey
Starting Member

United Kingdom
47 Posts

Posted - 11 May 2017 :  08:40:37 Show Profile Click to see lumpey's MSN Messenger address Reply with Quote
I am looking for the pipe that connects the heater to the windsceen and door window under the dash, drivers side.
Its for my 1974 saab 95. It got smashed during the work that was carried out recently.
thanks in advance.

andydeans3
V4 Mad

United Kingdom
936 Posts

Posted - 16 May 2017 :  11:06:48 Show Profile Reply with Quote
Lumpey
Whole bunch of heater vents on E bay just now. Not sure if the one you want is among them..

Andy

http://www.ebay.co.uk/itm/vintage-saab-96-v4-heater-control-and-vent-parts-/222511176000?hash=item33ceb31940:g:eykAAOSwjDZYgVaW

1978 LHD SAAB 96
1978 MGB Roadster
2008 LHD "Classic" Renault Twingo
Go to Top of Page

john-saab
Administrator

United Kingdom
2647 Posts

Posted - 16 May 2017 :  18:55:00 Show Profile Reply with Quote
I think the one required is the light grey one that turns to dust. I don't have a spare at the moment.

'73 96 (Vernon),'74 95 (Veronica)plus 4 other 95's and 2 96's
Go to Top of Page

Proudycakes
Starting Member

United Kingdom
13 Posts

Posted - 16 May 2017 :  22:29:29 Show Profile Send Proudycakes an AOL message Reply with Quote
I was searching for these for a while without success. I bought some air ducting pipe from merlin motorsports of the correct diameter instead, works a treat and less fragile that the brittle plastic pipes. If you do manage to find a second hand one chances are it will crack during fitting.
Go to Top of Page

Wonky door
Starting Member

United Kingdom
36 Posts

Posted - 19 May 2017 :  16:26:50 Show Profile Reply with Quote
I had one of these disintegrate in my hand, I darn' t touch the other side after that. I substituted a piece of vacuum hose of the correct diameter. Don't have the small side demister pipe connected yet.
Go to Top of Page

v4admin
Forum Admin

United Kingdom
363 Posts

Posted - 19 May 2017 :  18:32:10 Show Profile Visit v4admin's Homepage Reply with Quote
had the same problem recently, had to take it off and it fell it many pieces in my hand, loads of glue gun, a piece of plumbing plastic pipe and back together again for now. Perhaps someone with the right kit could 3D print them?
Go to Top of Page

melle
V4 Guru

United Kingdom
2229 Posts

Posted - 19 May 2017 :  20:09:01 Show Profile Visit melle's Homepage Reply with Quote
This is not a part you want to 3D print, rather make from aluminium tubing.

www.saabv4.com
Go to Top of Page
 Previous Topic Topic Next Topic 
 New Topic  Reply to Topic 
 Printer Friendly 
Jump To: 
Snitz Forums 2000
SAAB V4 Forum© 2000-04 Snitz CommunicationsGo To Top Of Page