SAAB V4 Forum
SAAB V4 Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 Classified Ads
 V4's For Sale
 1971 Saab 96 in bits!
 New Topic  Reply to Topic 
 Printer Friendly 
Author Topic Next Topic 

rannsachair
V4 Beginner

United Kingdom
92 Posts

Posted - 05 Apr 2019 :  16:23:22 Show Profile Reply with Quote
Hi folks, I have not been getting much done to my Saab over the last few years due to health issues: heart surgery last year and I am currently part way through chemotherapy for a cancer that has spread quite significantly. Its made me think of all the things I have on the go and think best I consider passing the Saab to someone who would get it back together.

The attached link has quite a few photos: https://www.mig-welding.co.uk/forum/threads/1971-saab-96.63885/page-4

The bad bits - some rot in the usual places and fully dismantled.

The good bits - Body is still solid and not a massive amount of welding required.

Interior is good. See photo's of car from when I bought it.

All body panels including doors are very good.

Engine rebuilt as a 1.7 with a 7.6 cam, new high flow oil pump, new steel timing gear,new rings, big ends, mains, rings and balance shaft bearings, twin choke manifold, alloy rocker covers, v6 valve springs, spare unleaded heads, Compete diaphragm clutch kit with modified flywheel. Weber 28/36 DCD, silicon hose set, reconditioned radiator, new Jetex exhaust in the box.

Toyo tyres, 2 brand new.

Rear axle rebuilt with new cylinders, brake part kit and new bushes.

Front suspension rebuilt with polybushes - all suspension including springs epoxy coated. New KYB gas shock absorbers. New brake disks and caliper kits fitted.

Compete set of window door and boot seals ( receipt for $662) , reconditioned steering rack, new heater valve, reconditioned gearbox and original, Payen gasket set, new balljoints, track rods, water pump

Bumper set rebuilt using good second hand parts.

I have piles of spares, many new old stock: alternator, headlamps, all badges, stainless wing guards.

Original Saab radio centre console

I had intended redoing the dash with extra VDO gauges - new old stock gauges and transducers for rpm, oil pressure, voltage and water temperature.

I realise I could probably get more cash back selling everything separately, though I would prefer it to go to someone who will put it back together.

There are no bits missing, but you will need to know Saabs to put it back together.

If you are interested get in touch and I will talk you through what is there and what has been done. I have no idea what it is worth but I have receipts for over 2000 of parts that I have bought over the last 6 years.

melle
V4 Guru

United Kingdom
2727 Posts

Posted - 05 Apr 2019 :  19:04:45 Show Profile Visit melle's Homepage Reply with Quote
Sorry to hear of your decision Tom, but very understandable under the circumstances. Best of luck with your health.

www.saabv4.com
Go to Top of Page

rannsachair
V4 Beginner

United Kingdom
92 Posts

Posted - 05 Apr 2019 :  19:39:41 Show Profile Reply with Quote
Thanks Melle, it has been a tough decision to consider, I bought the car 6 years ago when it was taxed and mot'd though I quickly realised that there were areas that needed sorted to stripped it down with the plan to make it a rally replica, I lacked energy for the last few years and have a few other projects on the go, so my family suggested it was time to consider when I will get the time to finish it - it never entered my head to part with it. Being sensible I am unlikely to have the time or energy to finish it. I would really hate to see it broken up, seems too good for that.
Go to Top of Page

rannsachair
V4 Beginner

United Kingdom
92 Posts

Posted - 06 Apr 2019 :  11:53:13 Show Profile Reply with Quote
I have had a quick look through receipts for a fraction of the parts I bought with the car, these are just some of the larger ones I could find:

Vapour blasted twin choke manifold and vacuum plate 150
Good 1.7 crank and high compression pistons, rods and balance shaft (From Melle) 400
Malbrad steeltiming gear 368
Epoxy coating parts 78
Burton v6 valve springs and alloy filler cap 65
Burton high flow oil pump and crankshaft seal 62
Simons (Jetex Exhaust) 220
Windscreen rubber with chrome moulding, rear window rubber and chrome moulding, boot seal, door seal set all from Jack Ashcraft $600 = 460
F.W. Thornton piston rings, main and big ends 198
Radiator re-cored 95
Powerflex bush kit 72 + 76
Heater valve 55

Scandix 4 Kayaba gas shocks, brake calliper repair kit, fender strip 300 euro = 258
Starter Motor 48
Re4conditioned Steering rack 49.50
Scandix rear axle centre bush and trailing arm bushes 180 Euro (155)

Cast Alloy Rocker covers from John Redmund Metal Casting 161
Silicone Hose Kit 150
Diaphragm Clutch Kit with machined flywheel 400
7.6 Cam 150
Reconditioned Gearbox: stripped, cleaned and reassembled with new bearings and seals where needed and all clearances set as per factory manual and finally filled with a GL4 fully synthetic gear oil which will protect the diff but allow easy gearchanging. From Johh Tatlow (jtd on saab v4 forum) 200

That is over 3800 and not including new tyres, new alternator, stainless wing guards, spare set of heads with unleaded valve seats, complete set of new badges, plus piles of other parts and the vdo instruments. I have lots of boxes of spares, many are new.

I paid 1800 for the car, which has an excellent interior. I will have put at least 7000 into it.

I would sell the lot for first offer over 3000 (which I think should be a bargain for someone) provided they planned to rebuild the car.

Some photo's of the nice bits:









And the car as purchased:




Go to Top of Page

Obilex
Starting Member

United Kingdom
16 Posts

Posted - 11 Apr 2019 :  00:07:09 Show Profile Reply with Quote



I would certainly be interested in your car, where are you located.
Go to Top of Page

rannsachair
V4 Beginner

United Kingdom
92 Posts

Posted - 11 Apr 2019 :  08:53:23 Show Profile Reply with Quote
Hi Obilex, I am located in Lochgilphead, Argyll - so am not too far from you.

I cannot seem to get the email on this site to work, if you would a chat, email me on rannsachair@hotmail.com

Thanks

Edited by - rannsachair on 11 Apr 2019 09:04:32
Go to Top of Page

72sonett3
V4 Fanatic

Spain
246 Posts

Posted - 13 Apr 2019 :  19:33:34 Show Profile Reply with Quote
Are you sure you have the brake shoes on the right way?

This is the right side:


--
'72 97
'77 96L conv.
'79 96GL (LPG)
'83 900i (LPG)
'95 900SE conv.
'99 9-3T
Go to Top of Page

greg124
V4 Fan

United Kingdom
157 Posts

Posted - 13 Apr 2019 :  21:33:42 Show Profile Reply with Quote
Tom's photo shows the left side, which looks correct to me
Go to Top of Page

rannsachair
V4 Beginner

United Kingdom
92 Posts

Posted - 26 Apr 2019 :  14:07:44 Show Profile Reply with Quote
Car now sold to Obilex to complement his rally car. Great to see it go to a good home.
Go to Top of Page
  Topic Next Topic 
 New Topic  Reply to Topic 
 Printer Friendly 
Jump To: 
Snitz Forums 2000
SAAB V4 Forum© 2000-04 Snitz CommunicationsGo To Top Of Page