SAAB V4 Forum
SAAB V4 Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 Technical
 General Technical
 Door handle removal
 New Topic  Reply to Topic 
 Printer Friendly 
AuthorPrevious Topic Topic Next Topic 

JMat99
V4 Beginner

68 Posts

Posted - 14 Aug 2017 :  19:32:37 Show Profile Reply with Quote
I would appreciate advice on how to remove them from my 1972 v4. The manuals refer to two screws, one on the outside and one on the inside. I can see and have removed the one on the inside, but can see nothing on the outside.
Thanks in anticipation

chris steeden
V4 Fan

United Kingdom
163 Posts

Posted - 14 Aug 2017 :  20:38:53 Show Profile Reply with Quote
If you are referring to the outer door handles then you have a screw on the door edge (above the lock mechanism and opposite the striker plate) in line with the handle. Only slacken this screw but do not take it out fully as it holds a square bracket which the handle fits through.You then have to jiggle the handle out. I take it that you removed the door card then removed the small screw and washer which holds the lock from the inside first though.

Edited by - chris steeden on 14 Aug 2017 20:41:26
Go to Top of Page

JMat99
V4 Beginner

68 Posts

Posted - 15 Aug 2017 :  21:50:08 Show Profile Reply with Quote
Many thanks Chris. Much appreciated
Go to Top of Page
 Previous Topic Topic Next Topic 
 New Topic  Reply to Topic 
 Printer Friendly 
Jump To: 
Snitz Forums 2000
SAAB V4 Forum© 2000-04 Snitz CommunicationsGo To Top Of Page