| Author |  Topic  | |
Jimmys old Saab
V4 Beginner
United Kingdom
98 Posts |  Posted - 25 Jun 2019 : 23:01:31  
| Could use a length of the rubber edge trim where the front panel meets the wings on either side. Anywhere known that stocks the correct profile?
Saab 96 1971
Saab 9000 CSE turbo 1993
VW T5 LWB 2012
|
|
andydeans3
V4 Guru
United Kingdom
2016 Posts | Posted - 25 Jun 2019 : 23:17:22
| Jimmy
Malbrad stocks it, but I think he only sells it in a quantity that is enough for all 4 wings.
Update. Jimmy, sorry, I realise now that I'm talking about something else.
I'd have thought that you'd get the rubber, for the front panel edges, from Woollies, or as Deggsie says below, from Malbrad.
Andy
1978 LHD SAAB 96
1978 MGB Roadster
2008 LHD "Classic" Renault Twingo
1991 Nissan Figaro |
Edited by - andydeans3 on 26 Jun 2019 23:23:20 |  |
|
deggsie
V4 Fanatic
United Kingdom
432 Posts | Posted - 25 Jun 2019 : 23:44:46
| Malbrad also stock the narrow rubber trim that fits vertically along the edge of the front grille panel (which is what I think you mean). I've just ordered a pair to replace the old ones that have gone brittle, as well as the three lower rubber supports.
___________________________
Saab - beyond the conventional ! |
Edited by - deggsie on 25 Jun 2019 23:46:34 | |
|
green96v4
V4 Mad
Canada
738 Posts | Posted - 27 Jun 2019 : 12:51:38
| I may have a couple of spare ones if you're not too fussy about condition, it's also the same profile as the trim that goes around the inlet cover under the front windscreen
| |
|
ianh
V4 Fanatic
United Kingdom
250 Posts | |
Jimmys old Saab
V4 Beginner
United Kingdom
98 Posts | Posted - 27 Jun 2019 : 17:08:10
| quote:
Originally posted by green96v4
I may have a couple of spare ones if you're not too fussy about condition, it's also the same profile as the trim that goes around the inlet cover under the front windscreen
Yes, please, if the postage isn't ridiculous, I should think they'll be ok in an ordinary envelope.
Saab 96 1971
Saab 9000 CSE turbo 1993
VW T5 LWB 2012
| |
|
green96v4
V4 Mad
Canada
738 Posts | Posted - 28 Jun 2019 : 12:15:18
| | Ok I'll take a look in the boxes today, what's your address? (the PM feature on this forum can be a bit hit and miss) | |
|
green96v4
V4 Mad
Canada
738 Posts | Posted - 28 Jun 2019 : 16:19:47
| 
Yes i have a spare pair - one has a 4-5mm split at one end (which you could hide under the bumper if you used it on the passenger side) and there's a bit of paint on the lip where the donor car they came off wasn't masked properly for painting (it scrapes off with your finger nail though)
Yours if you want them and yes, they'll fit into a normal envelope | |
|
| | Topic | |
Front panel rubber edge trim
