All Forums  Classified Ads  Parts Wanted  Needle Bearing Rollers

Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!

Screensize:	640 x 480800 x 6001024 x 7681280 x 1024
UserName:
Password:
Format Mode:	Basic Help Prompt
Format:
	FontAndale MonoArialArial BlackBook AntiquaCentury GothicComic Sans MSCourier NewGeorgiaImpactLucida ConsoleScript MT BoldStencilTahomaTimes New RomanTrebuchet MSVerdana Size123456 ColorBlackRedYellowPinkGreenOrangePurpleBlueBeigeBrownTealNavyMaroonLimeGreen
Message: * HTML is OFF * Forum Code is ON Smilies	[quote][i]Originally posted by Dynorog[/i][br]Hi, I’ve lost one needle roller from an inner drive joint. Does anyone have a source for these. I can find a supplier. Who has 2.5 x 11.8 rounded ends. Near enough ? (: ) Cheers Dynorog [/quote]
	Check here to include your profile signature. Check here to subscribe to this topic.

T O P I C    R E V I E W
Dynorog	Posted - 28 Feb 2026 : 23:06:27 Hi, I’ve lost one needle roller from an inner drive joint. Does anyone have a source for these. I can find a supplier. Who has 2.5 x 11.8 rounded ends. Near enough ? (: ) Cheers Dynorog
11   L A T E S T    R E P L I E S    (Newest First)
UK_Sub	Posted - 16 Mar 2026 : 10:03:52 Thanks to Woody - my cuppeth is complete! Thank you!
andydeans3	Posted - 15 Mar 2026 : 17:10:37 Malbrad has them. Andy 1978 LHD SAAB 96 1991 Nissan Figaro
Woody	Posted - 06 Mar 2026 : 18:01:04 Checked one of the driveshafts and there should be 25 needle rollers so my other cup was missing one. Escape artists they are.
Woody	Posted - 06 Mar 2026 : 16:34:06 The needle rollers are 12mm long and 0.10" in diameter in the V4. I have found a cup with 24 rollers in the spares boxes. There should be two more cups to complete two drive shafts with CV joints from my second SaabV4, but I have not found them yet. Yes I can send you some if you PM an address. You can use messenger if you use Facebook.
Dynorog	Posted - 05 Mar 2026 : 16:33:04 My longnose 2 stroke has a 4speed box and the drive shaft is as the V4 with alternative bell housing. Dynorog
UK_Sub	Posted - 04 Mar 2026 : 12:09:49 I found these in my spares - but I assume they are for 2-stroke driveshafts as the needle bearing looks thicker and I've not seen rubber boots on these before!? Have you got any spare ones you could send to me too Woody? If so, I'm happy to send a SAE to take care of the postage side of things (post is so expensive these days!). Simon
Dynorog	Posted - 03 Mar 2026 : 21:20:42 Thanks All Woody I’ll try and Pm you. Thanks Cheers Dynorog
Woody	Posted - 02 Mar 2026 : 22:12:52 I have some spare. PM an address please andI shall send you what you need.
elanwannabe	Posted - 02 Mar 2026 : 03:00:50 Dynorog: I have notes that needle bearings are available from classicsaabparts.nl, however, I have not purchased any. Unfortunately, I failed to record the source of this info, but came from a facebook vinatage saab page such as saab restoration and preservation. Hope this helps. Stuart from East Tennessee, USA, near The Tail of the Dragon
Dynorog	Posted - 01 Mar 2026 : 16:58:59 Thanks Melle, I'll probably have to get in touch before you go to NL, but I've looked everywhere on line but have only been able to find 11.8s. I've orded some earlier this p.m. just to try the fit.I was thinking molygrease would take up the 0.2 mm difference (as long as I dont think too mush about it) Must catch up over a pint next time I am down in Bath. Cheers Roger Dynorog
melle	Posted - 01 Mar 2026 : 15:00:48 I have loads, but not going to my workshop in NL before July I'm afraid. Iirc they are 2.5x12mm, most (online) bearing suppliers will be able to sort you out if no one here does. www.saabv4.com